News

Eureka Pumps AS has recently been awarded a contract for upgrading the cargo pumps on the storage vessel Njord Bravo, from Njord Future project.

The project is part of a framework agreement between Statoil and Eureka Pumps AS, and has an estimated value of approx. NOK 20 million.

Main activities include support during retrieval of the pumps onboard Njord Bravo, as well as disassembly, control/upgrade and testing of the pumps, to give them another 20 years of operation.

The pumps were delivered by Eureka back in 1996, and has been operating for 17 years without the need for retrieval/maintenance.
The work will start early September 2017, and will last throughout 2018.

The service and upgrade of the pumps will be executed at Eureka Pumps AS’s workshop in Kristiansund. This contract, together with other ongoing work, will ensure a good foundation for operations in Kristiansund. Eureka see a general increasing activity level. String test of the full length pumps will take place at Eureka Pumps’ modern facilities at Sørumsand. The project is organized by project management from Eureka Pumps Fornebu.

This declaration of trust from Statoil, and acknowledging Eureka’s expertise in pump service, says Eureka’s Director for After Sales Support Øystein Solberg.

The workshop in Kristiansund is constantly executing more and more complex projects, both nationally and internationally.

Eureka has also an agreement for after sales support with Njord Future Project for Njord Bravo, while it is temporary quayside at Sterkoder in Kristiansund

EUREKA PUMPS AS deliver complete CG Spare Parts and Replacement Pumps.

The centrifugal pump type CG is designed for a long and reliable service life. The use of OEM made spare parts are essential to maintain the
reliability and availability of your CG pumps.

The EUREKA PUMPS AS scope of delivery includes:

CG Replacement pumps:
• Complete pump units.
• Bare shaft pumps. No motor, pump foot, motor pedestal and transmission included.

 CG Parts:
• Spare parts.
• Overhaul kits.

Your spare parts and replacement inquires and orders are handled by our experts, all trained on the actual equipment. Competitive pricing and short lead times.

Read more on  our website www.eureka.no

Download the Thune Eureka Marine CG Pump Parts Brochure

Contact person:
Mr. Per Steinar Hanssen (Department Manager Spares & Replacement Pumps).
Mobile:+47 971 23 656
E-mail: psh@eureka.no

Alternative e-mail: marinepumps@eureka.no 

Norwegian Pump Technology from Eureka Pumps AS to the Culzean Field Development project to the UKCS.

Rehabilitering av Kjosfossen Kraftverk, Aggregat 1

.

Les mer:

EUREKA KJOSFOSSEN FLYER

Eureka Pumps main assembly & test facility is at Sørumsand located in between Oslo and the airport. It consist of 8 000 m2 workshop & assembly area, 1000 m2 warehouse and 1000m2 test bed. It comprise a state of the art indoor test station in compliance to ISO 9906. It is equipped with load bank, frequency converter, transformers, switchgears and other high and low voltage equipment for testing in compliance with worldwide customer requirements. It also contains test basins with test loop and connection to a 60 m deep hole with 1.8m dia for testing of deep well pump in full length.

The test station is purpose build for testing of Eureka scope of pumps and generator sets with capacities up to 10 000 m3/h and powers up to 3.5 MW with all applicable voltages:

• Full scale testing of firewater pump packages comprising of diesel gensets connected to full length electric submersible pumps.
• Testing of sea water lift pumps in full length. Line shaft pumps and electric submersible pumps.
• Testing of essential and emergency generators.
• Testing of all types of dry mounted pumps.

Please see our new video of the test station:

Eureka Pumps AS and Caprari S.p.A. Announce New Distributor Partnership Agreement for Norway

Eureka Pumps AS and Caprari S.p.A., two market leading pump manufacturers present in the international market, have announced their exciting new distributor partnership for Norway.

As of May 10th, Eureka Pumps has been appointed as the authorized distributor of the Caprari brand pumps, electric pumps, submersible motors and spare parts. Eureka will also handle installation, commissioning and repairs within the Norwegian market. This partnership will strengthen Eureka’s position, among others, in the civil and industrial water collection, boosting, transport and distributing clear water and for treating and conveying wastewater.

Eureka will use its own network of offices and workshops across Norway to ensure close proximity to current and future customers.

Contact:     Erik Hellings, erik.hellings@eureka.no
Telephone +47 458 18 494

or        Juan Benito, juan.benito@eureka.no
Telephone +47 465 04 646

Global offshore energy industry experts and leaders gathered in Houston 2–5 May, for the 2016 Offshore Technology Conference (OTC). More than 68,000 attendees from 120 countries attended this annual conference and exhibition.

Align AS was present with a shared booth between Eureka Pumps AS and Fire Protection Engineering AS. Due to the current market situation, it was observed fewer attendees compared to the record high 2014. However OTC is an important arena for the industry, and both Eureka and FPE had some good visits. In the current market with focus on investment cost and operational expenditures, we both have a better opportunity to get attention of our attractive solutions.

Eureka Pumps AS has been awarded a service contract for pumps from Det norske oljeselskap ASA.
The Frame Agreement is related to scope of work on the new built offshore production facility named Ivar Aasen and the operating FPSO named Alvheim.

Eureka shall provide support to Det norske’s offshore and onshore organization regarding service, overhaul and repair of pumps and related equipment, including but not limited to the following services:

• Installation, commissioning and start-up assistance
• Offshore services
• Work shop services
• Spare parts
• Training
• Other services typically as, Technical support, Integrated Operations, Re-engineering and
  Optimizing of Equipment and Systems

The agreement is valid for four years with an option for two plus two year’s extension period.

Eureka Pumps AS is a Norwegian pump supplier with more than 40 years of experience in the oil and gas industry, offering a range of pumps and generator sets that covers a majority of applications. Eureka supplies to new builds and operates advanced maintenance and service. The company also offers services for upgrading, modification, equipment testing,
installation and commissioning.

Eureka Pumps is a market leader among companies operating on the Norwegian Continental shelf, and is also present in international markets with selected applications, based on own technology. Eureka’s main office is located in Oslo, with branch offices at strategic locations along the Norwegian coast. Eureka also has offices in Houston, Busan and Kuala Lumpur.

Eureka Pumps is part of ALIGN. ALIGN is a market leader within delivery, maintenance and modifications of safety and production critical solutions in the Norwegian and International oil and gas markets. ALIGN is a “turn key” supplier of firefighting solutions, including fire pump systems, emergency generators, safety automation and active firefighting systems.

Contact:
Øystein Solberg, Director After Market, Eureka Pumps AS, oystein.solberg@eureka.no
Telephone +47 913 26 096
Or
Jon Kjetil Jutulstad, COO Eureka Pumps AS, jkj@eureka.no
Telephone +47 928 40 840

By: Cato Knutsen

Background
The background for this presentation was a Crude Booster- full scale high viscosity pump performance test, successfully executed in a joint venture between Eureka Pumps and Cetim Lab. The test was quite unique in its character and it was therefore decided to publish a scientific paper presenting the results, but also compare them with existing methods of predicting viscous pump characteristics. The paper “High Viscosity Test Of A Crude Oil Pump” was presented during the 44TH TURBOMACHINERY & 31ST PUMP SYMPOSIA (TPS) in Houston Texas Sept. 14-17 2015, after being carefully selected by the TPS advisory committee.Background

About TPS
The TPS program includes lectures, short courses, discussion groups and tutorials within topics such as maintenance, design, troubleshooting, real- field problems and solutions. In addition, an exhibition is presented hosting leading companies from the oil and gas, petrochemical, power, pumping and turbomachinery industries presenting full-size equipment, advancements in technology and emerging industry trends. Needless to say, countless networking opportunities pervade the event.

Attracting more than 5,500 people and 350 exhibiting companies from 48 countries this made the TPS an ideal place to present this paper, Eureka’s technical expertise and ultimately our name.

Presentation
Surprisingly, the paper received some attention even before it was published (by Hydraulic Institute among others). Later, during the symposia the  paper was presented for a full audience and even including the TPS Advisory Committee Chairman. The presentation was successfully  completed and the good support from our Eureka Houston office and Rune Osmundsen was highly appreciated.

Future work
Continue producing papers, research reports or other scientific work of interest. In a business with increasing competition this is an important contribution in making this company stand out towards our clients. Professional skills and integrity are key factors for succeeding with this work.
Thanks to everyone making a contributing to this paper and presentation.

See paper here: lecture project-V30